Contributed Articles

Replacing your window soon? Before calling a manufacturer and placing an order, you should do your measurements first. Getting the correct measurements is critical because if you order the wrong window, you might end up having to make an order again or renovating your window opening. Old measurements won't do because the window opening may have deteriorated.

The first thing you need to do in measuring for replacement windows is get the width. Using a tape rule, determine the width by starting on the top right corner going towards the top left. You'd want to do this at the middle point and also at the bottom. Measure to the 16th of an inch. The measurement should be within a quarter of an inch of each other. Get the smallest one if the discrepancies exceed this value.

After getting the width, the next is height. Height measuring for replacement windows is done almost similarly as mentioned above. Determine the height by pulling the tape rule from top corner to the bottom corner of the right window side. Measure the middle and left window side too. Again, if they aren't within a quarter inch of each other, get the smallest size.

If you're not satisfied with your results, then you should get a second opinion. Getting one will enable you to confirm the data you got. As mentioned above, getting the correct data is very important so that you may avoid unnecessary expenses and adjustments.

After measuring for replacement windows, then you should order from a manufacturer that will accommodate your needs. Remember to give the measurements as width by height and not the other way around or you'll get a different window altogether.

So, do these measurements first before you replace window. Don't forget to get a smaller one than a larger one if you're not sure. If what you got is smaller, then all you need to do is fill the spaces with shims.

Replacing a window soon? Measuring for replacement windows should be done properly because otherwise, you'll spend more than you should have. Getting incorrect measurements will most probably have you doing unnecessary renovations.